Leupold Mark 4 Torque Wrench 48701

Buy Cheap Leupold Mark 4 Torque Wrench 48701

Buy Low Price From Here Now
With this special wrench you can not only tighten, but loosen the mounting screws on Mark 4® style rings. Delivers the proper amount of torque (65-in lbs) when installing Mark 4 style rings for return to zero accuracy.
Readmore

Technical Details

- Torque wrench designed for Mark 4-style rings
- Lets you both tighten and loosen mounting screws
- Delivers required 65 inch-pounds of torque
- Produces correct return-to-zero accuracy
- Carries Leupold's full lifetime guarantee
See more technical details

 "Great Torque Wrench" 2010-04-21
By J. Dang
I recently purchased a Remington 700 5R .308 and equipped it with a Leupold Mark 4 6.5-20 x 50mm LR/T scope. The scope is mounted on a NightForce one piece 20 MOA short action base and NightForce Rings. NightForce recommends that you tighten their rings to 68 inch/lbs but I think it is just a gimmick to get you to buy something that they sell. The Leupold Mark 4 Torque Wrench is set to 65 inch/lbs and I believe it will hold just fine. Both the Leupold and the NightForce torque wrenches are made by Seekonk so there is no difference in quality. Another reason to go with the 65 inch/lbs torque wrench is if you ever need to switch out stocks, most are set to the 65 inch/lbs recommendation.


Images Product

Buy Leupold Mark 4 Torque Wrench 48701 Now

read more “Leupold Mark 4 Torque Wrench 48701”

Leupold Ring Wrench 48762

Buy Cheap Leupold Ring Wrench 48762

Buy Low Price From Here Now
Install rings without damaging your rifle or scope using this unique tool. For 30mm or 1" rings.
Readmore

Technical Details

- Ring wrench designed for Leupold rifles and scopes
- Lets you install mounting rings without damaging rifle
- Intended for 30mm or one-inch mounting rings
- Backed by Leupold's full lifetime guarantee
See more technical details

Images Product

Buy Leupold Ring Wrench 48762 Now

read more “Leupold Ring Wrench 48762”

BARSKA AR-15 Stock Wrench Tool

Buy Cheap BARSKA AR-15 Stock Wrench Tool

Buy Low Price From Here Now
Length (in): 5.5", Width (in): 1.187", Material : Carbon Steel, aplicable firearms: AR-15
Readmore

Technical Details

- A must-have for gun maintenance and repairs.
- For AR-15 rifles
- Made of Carbon Steel
- Install or remove AR15 stock, Without Damage Steel
- Will not damage steel parts of AR-15
See more technical details

Images Product

Buy BARSKA AR-15 Stock Wrench Tool Now

read more “BARSKA AR-15 Stock Wrench Tool”

BARSKA AR-15 Combo Wrench Tool (Long)

Buy Cheap BARSKA AR-15 Combo Wrench Tool (Long)

Buy Low Price From Here Now
Install and disassemble free float tubes, barrel nut, ½" drive for socket wrench, extension tube, carbine stock, screw drive tip for butt stock and compensator.
Readmore

Technical Details

- A must-have for gun maintenance and repairs.
- Ultimate tool for an AR15 owner.
- Made of Carbon Steel
- Will do every function you need.
- Length (in): 12.625", Width (in): 2", Material : Carbon Steel, aplicable firearms: AR-15
See more technical details

 "Not bad for the price!" 2009-10-22
By a real computer geek
Works great on my Colt 6450 9mm carbine. All the tolerances (barrel nut, stock, etc.) lined up perfect on the gun. Much cheaper price than a lot of other similar tools. Make sure you order the short tool if you have a newer AR-15 with the collapsible stock.


Images Product

Buy BARSKA AR-15 Combo Wrench Tool (Long) Now

read more “BARSKA AR-15 Combo Wrench Tool (Long)”